Other Dental Products
We offer a wide range of products crucial for creating removable dentures
MRD Alginate Chromatic
MRD Alginate Chromatic is an alginate dental impression material.
It is chromatic, dust-free, and has a normal setting time. It has no dimensional changes under 100% humidity for 50 hours.
Following are its working and setting times:
| Stage | Colour | Time from Start* |
| Powder | White | 0 sec |
| Mix with Water (17.5gm : 36ml) | Pink | 0 sec |
| Finish Mixing | Pink | 40 secs |
| Load Tray | Pink | 1 min |
| Insert Tray in Mouth | Pink | 1:20 min |
| Final Set | White | 2:15 mins |
Note: Higher temperature would accelerate the setting time whereas lower temperature would retard the setting time.
| Specifications | Values |
|---|---|
| Size | 450gm |
| Flavour | Strawberry |
Characteristics
- Chromatic
- Dust-free
- Thixotropic
- Rubber effect
- Easy to mix
- Dimensional stability under humidity
Modelling Wax
A consistent wax, designed to give good overall handling properties for everyday laboratory use.
| Specifications | Values |
|---|---|
| Colour | Pink |
| Size | 200gm (10 sheets) |
Characteristics
- Optimal Consistency
- Excellent at Various Temperatures
- Smooth Texture
- Low Shrinkage
- Consistent Quality
- Clean and Residue-Free Burnout
- Biocompatible and Non-Toxic
Inlay Wax
Blue inlay casting wax is a superior wax for mock-ups that softens in hot water and can be carved easily to produce excellent results.
The mock-up also allows occlusal aspects of restorations, such as anterior guidance, to be evaluated.
| Specifications | Values |
|---|---|
| Colour | Blue |
| Size | 200gm |
Sprue Wax
A consistent wax, designed to give good overall handling properties for everyday laboratory use.
| Specifications | Values |
|---|---|
| Colour | Blue |
| Size | 500gm (1.5mm, 2mm, 2.5mm) |
Light Cure Tray
MR Dental LC Tray is a light-curing, customized tray material based on hybrid composite.
The consistent material properties allow clean and fast processing. Excess material can be easily reused, e.g. for the fabrication of tray handles.
It can be quickly cured with UV or halogen light.
| Specifications | Values |
|---|---|
| Colour | Pink |
| Size | 50 sheets |
Characteristics
- Light curing special tray material based on hybrid composite.
- Highly cross-linked & always maintains the same properties to allow consistent results.
- Surplus material can also be used for other work like modelling a grip for the preformed tray without problems.
- Plaque photo is quickly polymerized using a light cure machine/halogen light
Shellac Base Plate
High-quality dental fittings for superior patient care.
| Specifications | Values |
|---|---|
| Colour | Brown |
| Size | 8 Upper Plates and 4 Lower Plates |
Die Stone Plaster – Class IV
Die Stone is a high-quality dental material designed for accurate and reliable casting of dental impressions.
Recommended for crown and bridge, dies and cast partials, basing dental arches and opposing models, and making study models.
Suitable for economical yet tough, non-brittle, and durable moulds.
| Specifications | Values |
|---|---|
| Colour | Orange |
| Size | 1kg |
Characteristics
- Type: Class IV
- Water / Powder Ratio: 22 ml /100 gm
- Soaking Time: 30 seconds
- Mixing Time: 30-40 seconds
- Working Time: 5 minutes
- Setting Time: 6-8 minutes
- Expansion: 0.10% max.
- Compressive Strength: 1 hour – 400 kg/cm2
- Compressive Strength: 24 hours – 900 kg/cm2
Dental Cotton Rolls
Cotton rolls are used to absorb saliva and other fluids to help keep operative areas free of excess moisture.
These small rolls of cotton can be placed in a patient’s mouth at the outset of treatment.
Our product is made from the finest selection of 100% cotton.
| Specifications | Values |
|---|---|
| Colour | White |
| Size | 8 * 37 mm (1,000 Pcs per packet) |
Suction Tips (Saliva Ejectors)
Flexible saliva ejector suction tips are used to remove saliva, blood, and other fluids from a patient’s mouth during dental procedures.
These are disposable and made from non-toxic material.
| Specifications | Values |
|---|---|
| Size | 105 mm x 6.5 mm (100 Pcs) |
Characteristics
- Side Vents with Recessed Center Suction Hole
- Thickest Stabilizing Wire
- Non-Removable Tip
- Latex-Free Material
- Pliable and Non-Clogging
- Custom-Fit for Standard Saliva Ejector Hose Ends
- Smooth and Rounded Edges
- Disposable for Infection Control
Get Quote
Send us your enquiry and we’ll get back to you within 24 hours
Other Categories
