MR Dental Die Stone Plaster – Class IV
Die Stone is a high-quality dental material designed for accurate and reliable casting of dental impressions.
Size: 1 kg
Available in orange and violet colours.
Description
Recommended for crown and bridge, dies and cast partials, basing dental arches and opposing models, and making study models. In use where economical yet tough, non-brittle and durable moulds are required.
Product Specifications:
- Type: Class IV
- Water / Powder Ratio: 22 ml /100 gm
- Soaking Time: 30 seconds
- Mixing Time: 30-40 seconds
- Working Time: 5 minutes
- Setting Time: 6-8 minutes
- Expansion: 0.10% Max.
- Compressive Strength: 1 hour – 400 kg/cm2
- Compressive Strength: 24 hours – 900 kg/cm2
Mixing Instructions:
Ensure all utensils to be used for mixing are clean. In the case of a certain type of impression material such as hydrochloride. Drain water from the impression completely. Distilled water is recommended. Soak in water with a temperature not exceeding 27°C for 30 seconds.
Caution:
Wear eye protection when cutting and trimming. Store in a cool and dry place in a tightly sealed container. Gypsum products deteriorate when exposed to the atmosphere, particularly in high humidity.
