MR Dental Rapid Repair Liquid (Monomer)
Rapid Repair Monomer for denture base material.
To be used with Rapid Repair Powder for repairing dentures.
Earlier known as Meadway Dental Acrylics.
Description
The prices mentioned are inclusive of 18% GST.
INSTRUCTIONS FOR USE
Preparation: The broken denture addition or reline is prepared in the usual way.
Mixing: Rapid Repair Powder and Rapid Repair Liquid are mixed to a creamy consistency (1.3gm Powder to 1.0ml Liquid). Care should be taken when mixing to ensure that no air is trapped.
Application: After approximately 30 seconds, the mix is ready for use and a thin coat should be applied over all the prepared surfaces and into the cracks. The material will then begin to reach the ‘non-slumping’ stage so that the remainder of the repair/addition can be built up. Care must be taken to ensure that no air is trapped during these operations.
Curing: It is not necessary to use a ‘pressure pot’ to cure this material and perfect results will be produced provided no air has been trapped during the mixing or building-up stages, although ‘pot’ could be used if desired to speed up the process.
The setting time in atmospheric conditions is 15-17 minutes at 21°C.
Powder to be used: Rapid Repair Powder
